How To Avoid Water Damage When Tinting The Windows On High End Cars

In this blog I will give you some tips and tricks for keeping it safe when tinting High End motor vehicles and please do watch the included video for the best ways to protect the vehicle from damage.


Water damage is something that can prove to be very expensive and if you don't take precautions before you carry out your installations you are heading for big trouble!

The main causes of water damage are two fold, its a bit of a catch 22 situation for the serious car window tinting installer. As a professional they will know that you can get very clean results by flushing down the window with either clean water or even their slippy window film mounting solution. Take this to the limit though and you can end up damaging electric window switches , airbag connectors and even ultra expensive amplifiers that are mounted in the trunk area.

Just the other day i tinted a brand new 2012 Mercedes Benz E Class, a nice car for sure and the customer was a picky type of person, I could tell that before I started the job so i knew I had to be on my best game and make sure he had no reason at all to complain, some of these customers can be really picky but if you meet their levels of expectation and become very picky about the finished product you deliver back to them, they will be happy customers for life and will tell every man and his dog what a good job you did.


So, what do you need to consider before you start tinting windows on some high end vehicles, well I will say limit your water usage for sure, mix up a slippier mounting solution than normal and install the windows on the dry side, I like to buff mine with a micro fibre cloth and then blow them dry with my heat gun, then  just flush down the edges slightly and maybe a quick mist in the main area of the window, then soak your film, I even install film with the windows completely dry sometimes ( with the film soaked only), you will be amazed how clean you can get your installations using this method. This method works well for quarter windows and drop glasses but what is the best way to tackle a back window in a sedan/saloon vehicle.

Look in the trunk area and on lots of cars they have side pockets, if you open these you may see a fusebox, or amplifier or sat nave unit or something else electronic. Take a towel or sham-wow cloth and cover all the electronics. I know on some of the Audi models the amplifier has an air intake, this faces upwards and and water just drips right into it, i have heard of quite a few tinters who have damaged these and must pay to replace them, at a cost of well over $1000.

Be careful - thats the first thing, don't go ploughing in soaking everything, tape off the C Pillar trims with masking tape as these can get wet and may get stained depending on what slip solution you are using. Only mist the back glass, don't flush it down, and when squegeeing out to the sides, be careful you push slowly, if you just flush lots of water into the 'C' panel area, on the BMW's they have the aerial/antenna amplifier in that area and they can get wet and that again can cost you money to put right. If in doubt and you can pull the trim away from the vehicle, try and have a quick look to see if their are any electonic components in the area in quetsion, and do what is needed to keep them dry. Cars are becoming more and more loaded with lecetrocnics and you need to be smart and get the knowledge as to what cars can cause a headache!

When I was doing a Mercedes Benz this week I decided to share with you what I do, I used my iphone and I made a quick video showing you how I avoid water damage when window tinting, all it takes is a towel, a few rags or I like to use a ShamWow cloth which is very absorbant and you are playing it safe and keeping out of trouble.

Watch this video for more information


So the bottom line is pay attention and do some research on the vehicle in question before commencing the installation, this information is not meant to scare you but give you an idea of what to look out for when you are working with high end vehicles and the pitfalls you may come across on your journey as a professional window tinter.

Here is a post on my technique for reverse rolling rear windows.

0 comments: